Mac OSx86

Home > News, OSx86 > JaS 10.4.8 Intel/AMD combo SSE2/SSE3!

JaS 10.4.8 Intel/AMD combo SSE2/SSE3!

October 14th, 2006 macgeek Leave a comment Go to comments

JaS has done some amazing work again!
He just released his 10.4.8 combo updates for Intel/AMD bundled in 4 packages.

2 packages for Intel SSE2 only and SSE2/SSE3 users

2 packages for AMD SSE2 only and SSE2/SSE3 users

This means you can update from any OS X 10.4.x to the latest JaS 10.4.8.
A full 10.4.8 DVD is to be expected soon… Stay tuned

Download them right here:
Download JaS 10.4.8 Intel SSE3 Combo Update
Download JaS 10.4.8 Intel SSE2 Combo Update
Download JaS 10.4.8 AMD SSE3 Combo Update
Download JaS 10.4.8 AMD SSE2 Combo Update

Important note for Intel SSE3 users only:

If you get an error where you can’t get past the blue screen, just do this:
Boot with following options: -v -f -s -x then type in
mount -uw /
mv /system/library/exrensions/r2d2.kext /system/library/extensions/
and let it boot up in safe boot

If you got a GMA gfx card:

While in safe boot mode, mount the 10.4.6/10.4.7 JaS install DVD
Run the following package:
/System/Installation/Packages/10.4.7.GMA900.Support.pkg
Run Disk Utility, repair permissions and reboot.

If you run Pro applications:

Open 10.4.7 combo update (from apple)
with pacifist (http://www.charlessoft.com)
Install the iokit.framework

Important note for Myzar DVD users:

You must apply the AMD combo packages only!
Even if you run on intel!

Share this post!

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/digg_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/reddit_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/stumbleupon_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/delicious_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/technorati_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/magnolia_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/google_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/facebook_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/yahoobuzz_48.png

http://www.macgeekblog.com/wp-content/plugins/sociofluid/images/twitter_48.png

Stream Audio, Photo & Video from your mac to any PS3, XBox 360, and more!

Earn money - Accomplish a freelance project

Categories: News, OSx86 Tags:

skr3dii

You need to burn the ISO file to a DVD. Instructions: http://www.google.com/search?client=safari&rls=...

xcmonx

Hi, unfortunately, i'm a noob for computers. What should i do after i torrented the JaS 10.4.8??? I is a iso file. I don't know why but WINRAR is able to open it. Before opened. The file size is 4.7 GB. But when i opened it, the sum of the files are less than 1 MB!!! I tried extracting it, but it was the same. All the files in there appear to be boot files. I tried another option. I tried opening it with MAGIC ISO. It could find all the files in there. But im stuck there. CAN ANYONE HELP ME PLEASE!!!???

Dawud

I burned the 10.4.8 jas and it seems to reboot to the main boot screen(i.e. press x to install mac os x)

HOWEVER, if I use VMware workstation, it boots fine. I've got to the blue screen so fat as I'm writing this.

Any reasons this would happen?

Thanks.

Installing on hpg60-247cl notebook

hytendra

hi guys i installed Leopard in a Pentium 4 2.8 GHz with 1GB RAM and 40 GB HD using cpus=1 maxmem=2048 -v then a select a package with chamaleon as my kernel and successfully installed except LAN not working and display not so good because not graphic card, but I used iAKTOS v5i, every thing is inside we just need to select the right package, good luck

Dip

Hello !

I tried selecting every option :) this time i get a B0 error.. i searched.. this is something to do with the boot loader.. im still working on it.. :)

if everything fails for me.. is there a way to get back my Windows XP to work? It's on the other partition :) haha I love experimenting :)

Thanks everyone!

Dp

Dip

Hi!

I have downloaded it!
are there default settings i can choose here?
i have tried to customize the installation and succeeded in the installation, however when it restarted, it says there is no keyboard connected. :))

but this is really good news for me as everything seems to go well aside from the keys.. anyways.. im stuck so i don't how to customize it... i wonder if it would be safe to select everything .

would love to hear your suggestions on this..

thanks!

dp

Dip

Thanks!! this is great then.. I've always wanted the TIGER installed :)
I'll download this one then .

So I'll just install as it is?

I am not yet familiar with all linux commands :)

Appreciate it so much !!

Thanks again!!

I can't wait to install it :)

dp

ncnoman

Hey Dip, I have very similar system, an HP nc6000. the chipset is intel 855GM and the graphics is ATi radeon 9600 mobile. These newer SSE2 leopard distros don't work as well as they shhould on our laptops. they are designed with newer systems in mind. i have downloaded kalyway 10.5.2 and jas 10.5.4 and neither got functional. the kalyway could load but after doing drivers (which i am not a newbie, i know what i'm doing) it would not boot back. and jas wouldn't boot after install at all. it's not a SSE2 issue, it's a chipset issue. there aren't any patches for leopard running on these 8-series intel mobile chipsets.
my best install yet came from XxX 10.4.10/11 disc. I use the 8.9.1 kernel, and the no-EFI kexts.

http://thepiratebay.org/torrent/4131264/xxX_OS_...

Dip

Thanks!! I will download the Jas version then.

Thanks, again!

dp

admin

I first used Kalyway DVD when I installed Leopard on my hack. Kalyway release is great and the guy was very helpful on IRC, he does great job! On the other hand, JaS is my man since the very beginning of this entire OSx86 community. He can make really good OSx86 DVD !

I would try JaS anyway his last DVD seems very complete.

http://www.google.com/search?hl=en&q;=JaS+OSx86...

Dip

Hi Admin,

which one should I download?
download the latest JaS release for Mac OS X Leopard 10.5.4.?
"For compatibility check, you should read the HCL : http://wiki.osx86project.org/wiki/index.php/HCL... "

As I checked the link[HCL], it's referring to Kalyway 10.5.1

So which one is the best?
Jas or Kalyway? are they the same?

Thanks !!

dp

Dip

Thanks for the link.

Last night I was trying to load it... this time..
i tried several parameters such as -v.. then later on.. i remember reading from one article... this guys suggested something like -v -t -f -s <-- i just tried it.. for some weird reason it went through! when it reached the welcome screen.. i tried other combinations such as -v -t.. or -v -f or -v -s... i don't even know what this commands do.. all i know .. -v is like a step by step process loading so you can see where it is having problems.. i am new to all this commands and environment.. i noticed something like this as well.. SSE3 emulator OK! .. anyways.. i got to load leopard successfully... but when it restarted.. it says OS cannot load properly.. i had Windows on the other partition.. i have no idea what to do next.. ill be reading the link you guys provided.. i am currently re-installing Windows XP then later on try again to load leopard :)

thanks all!

best regards,
dp

admin

hi Dip, I would suggest that you try to download the latest JaS release for Mac OS X Leopard 10.5.4. You can find it by searching this string : "JaS OSx86 10.5.4 Client Server Intel SSE2 SSE3" on thepiratebay.org. For compatibility check, you should read the HCL : http://wiki.osx86project.org/wiki/index.php/HCL...

Good luck and welcome to the OSx86 world.

Dip

Hi! I have a D610, Intel Pentium M , 1.73GHz w 512 MB RAM.
I downloaded iAtkos v1.01.. burn.. loaded dvd..

screen 1: grey, with beach ball spinning.
screen 2: blue screen the whole time...
dvd can't be ejected.. no key is responding,,
had to force shutdown..

any idea?
is it compatible with my laptop?
is Jas diffrent from what I have downloaded?

by the way, I have Windows XP installed in a another partition.

Thanks all.

thanks!

dp

Ted

I have a problem with PKG installer no longer working after this upgrade. I upgraded from 10.4.6.

This is the error:

sudo installer -pkg /Users/Ted/Desktop/Downloads/MacVidia1.0.8.pkg/ -target "/"

installer: Package name is Macvidia 1.0.8

dyld: lazy symbol binding failed: Symbol not found: __ZN3KJS9ObjectImpC1Eb

Referenced from: /System/Library/PrivateFrameworks/JavaScriptGlue.framework/Versions/A/JavaScriptGlue

Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore

dyld: Symbol not found: __ZN3KJS9ObjectImpC1Eb

Referenced from: /System/Library/PrivateFrameworks/JavaScriptGlue.framework/Versions/A/JavaScriptGlue

Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore

Tater

Can someone upload the SSE2 Intel update to rapidshare? Torents are blocked for me. :(

Email link(s) to xtrapoint4@hotmail.com

Thanks a million!

Julian

I just installed the update and it works perfectly. It only made the battery indicator dissapear.

But I still have a problem: if I try to boot with dual core configuration, either the computer stops even before reaching the blue screen or is boots but behaves weird (animations are faster, keyboard is not sensitive, etc)

Any idea of what's going on?

Julian

Dell D620 - Intel Core Duo 2.00 GHz - Nvidia Quadro NVS 110